Английский язык в информационных технологиях. Демкина Л.М. - 28 стр.

UptoLike

Составители: 

30
CHECK – UP
Вы должны знать:
от каких английских слов произошли 10 команд MS DOS
ATTRIB, BUFFERS, COUNTRY, CTTY, GRAFTABL, GRAPHICS, LIGHTON,
LINK, TERM, SHELL,
27 слов сообщений:
already, block, choice, contain, continuous, create, cylinder, define, deny, encounter,
exceed, exist, fail, failure, have, indicate, install, match, maximum, need, non-standard,
resynch, standard, table, the same, this, valid, queue
понимать структуру простых повествовательных предложений типа File
contains bad blocks.
Переведите следующие сообщения компьютера:
1. File does not exist.
2. Source is a hard disk.
3. Maximum available space for partitions is 305 cylinders.
4. Insert the first diskette in drive A and strike any key when ready.
5. Disk has invalid duster.
6. Source and target drives are the same.
7. Disk unsuitable for system disk.
8. Resynch failed.
9. X is not a choice.
10. No subdirectories exist.
11. Logical drive size exceeds the maximum available space.
12. Use DOS 2.0 or later.
13. This port does not exist.
14. Volume in drive X has no label.
15. No files match.
16. Partition selection X is not bootable.
                                             CHECK – UP
Вы должны знать:
  • от каких английских слов произошли 10 команд MS DOS
     ATTRIB, BUFFERS, COUNTRY, CTTY, GRAFTABL, GRAPHICS, LIGHTON,
     LINK, TERM, SHELL,
  • 27 слов сообщений:
     already, block, choice, contain, continuous, create, cylinder, define, deny, encounter,
     exceed, exist, fail, failure, have, indicate, install, match, maximum, need, non-standard,
     resynch, standard, table, the same, this, valid, queue
  • понимать структуру простых повествовательных предложений типа File
     contains bad blocks.
  • Переведите следующие сообщения компьютера:
     1. File does not exist.
       2. Source is a hard disk.
       3. Maximum available space for partitions is 305 cylinders.
       4. Insert the first diskette in drive A and strike any key when ready.
       5. Disk has invalid duster.
       6. Source and target drives are the same.
       7. Disk unsuitable for system disk.
       8. Resynch failed.
       9. X is not a choice.
       10. No subdirectories exist.
       11. Logical drive size exceeds the maximum available space.
       12. Use DOS 2.0 or later.
       13. This port does not exist.
       14. Volume in drive X has no label.
       15. No files match.
       16. Partition selection X is not bootable.




                                                    30