Инструментальные средства конструкторского проектирования электронных средств. Иванова Н.Ю - 113 стр.

UptoLike

ВУЗ: 

Университет ИТМО | Санкт-Петербург

Составители: 

Рубрика: 

113
Технологические параметры автотрассировки
Errors and Warnings - 0 Errors 0 Warnings 1 Hint
Hint: no default SMDNeckDown rule exists.
Report Contents
Routing Widths
Routing Via Styles
Electrical Clearances
Fanout Styles
Layer Directions
Drill Pairs
Net Topologies
Net Layers
SMD Neckdown Rules
Unroutable pads
SMD Neckdown Width Warnings
Pad Entry Warnings
Routing Widths Affected Nets
Rule - Width Width Constraint (Min=0.2mm) (Max=2mm) (Preferred=0.2mm) (All) 65
Rule - Width_Power Width Constraint (Min=0.2mm) (Max=1mm) (Preferred=1mm) (InNetClass('POWER')) 2
Back to top
Routing Via Styles Affected Nets
Rule - RoutingVias Routing Via (MinHoleWidth=0.8mm) (MaxHoleWidth=0.8mm) (PreferredHoleWidth=0.8mm)
(MinWidth=1.3mm) (MaxWidth=1.3mm) (PreferedWidth=1.3mm) (All)
67
Back to top
Clearance Rules
Rule - Clearance Clearance Constraint (Gap=0.25mm) (All),(All)
Back to top
Fanout Styles Affected Components
Rule - Fanout_Default Fanout Control Rule ( (All) ) 4
Rule - Fanout_Small Fanout Control Rule ( ((CompPinCount < 5)) ) 39
Rule - Fanout_SOIC Fanout Control Rule ( (IsSOIC) ) 2
Rule - Fanout_LCC Fanout Control Rule ( (IsLCC) ) 1
Back to top
Routing Directions
Layer Name
Direction
Top Layer Horizontal
Bottom Layer Vertical
Back to top
Drill Layer Pairs
Start Layer
Stop Layer
Top Layer Bottom Layer
Back to top
Net Topologies Affected Nets
Rule - RoutingTopology Routing Topology Rule(Topology=Shortest) (All) 67
Back to top
Net Layers Affected Nets
Rule - RoutingLayers Routing Layers(All) 67
Back to top
SMD Neckdown Rules Affected Pads
Hint: no default SMDNeckDown rule exists. 95
Rule - SMDNeckDownPower SMD Neck-Down Constraint (Percent=100%) (InNetClass('POWER')) 11
Back to top
Unroutable pads
Back to top
SMD Neckdown Width Warnings Affected Pads
Back to top
Pad Entry Warnings Affected Pads
Back to top

Страницы