Технический перевод в повседневной жизни. Макеева М.Н. - 33 стр.

UptoLike

ВУЗ: 

ТГТУ | Тамбов

Составители: 

Рубрика: 

CORDED/CORDLESS TELEPHONE
Battery Installation
• Turn the cordless handset off before battery installation.
1. Turn the antenna to the right and pull it out.
2. Remove the screw cover on the rear bottom side and release the screw.
3. Open the rear handset cover and change the battery.
4. Assemble the rear handset cover.
To charge the battery
Place the cordless handset on the charger.
Charge the battery in the cordless handset for about 8 hours before initial use.
• When the battery gets exhausted, warning tones will sound. Then, place the cordless handset on the
base unit to recharge the battery.
15 CHANNEL AUTOSCAN
Press the CH. button on the cordless handset until the clearest channel is selected.
Use this function to remove interference noise during a phone conversation.
TELESCOPIC ANTENNA
Extend the telescopic antenna of the base unit fully and vertically for the best performance.
• TONE / PULSE SELECTION
Set the TONE / PULSE switch on the base unit or on the corded handset to.
• T: for the telephone line with the touch tone service.
• P : for the telephone line with the rotary service.
• You can use the touch tone service in the rotary service area using the corded handset. Dial the phone
number and press the TONE button on the corded handset to change the dialing mode from pulse to tone.
The TONE mode will continue until you end the call. You can access special services such as electronic
banking, calling cards, telephone answering equipment, etc., which require tone signals for operation in the ro-
tary service area using this function.
Making Calls
Using the cordless handset
Press the TALK button on the cordless handset.
The INUSE indicator light will be on and you will hear a dial tone.
1. Dial the phone number.
2. To hang up the phone, press the TALK button again or place the handset on the base unit.
Using the corded handset
Set the TALK switch on the corded handset to ON.
The TALK indicator light will be on and you will hear a dial tone.
Dial the phone number.
To hang up the phone, set the TALK switch to OFF.
Answering Calls
Using the Cordless Handset

Страницы