Методические указания по теме "Моя специальность" для студентов 2 курса архитектурно-строительного факультета. Анашкина Л.А - 25 стр.

4 Section      4

     Text 1. Building Construction


   The construction of the homes and buildings in which people live and work has
been a major industry ever since early human beings first made huts of sticks, mud,
or rocks. Methods of building construction have been constantly improved since
those first crude structures. Modern skyscrapers can be built within a year or two.
Prefabricated buildings, with their various parts made in factories by assembly-line
methods, can be built in a day or two, but are rarely as durable as traditionally made
buildings.
   A building has two main parts, the substructure (the part below ground) and the
superstructure (the part above ground). The substructure is usually called the
foundation. It includes the basement walls, even though these may extend above the
ground.
   Both the substructure and the superstructure help to support the load (weight) of
the building. The dead load of a building is the total weight of all its parts. The live
load is the weight of the furniture, equipment, stored material, and occupants of a
building. In some regions, the wind load of a building is important if the structure is
to withstand storms. The snow load may also be an important factor. In some areas,
buildings have to be constructed to withstand earthquake shocks.
   Foundations are the chief means of supporting a building. They carry both the
dead and live loads. There are three main types of foundations: (1) spread, (2) pier,
and (3) pile.
   Spread foundations are long slabs of reinforced concrete that extend beyond the
outer edges of the building. Such foundations are not so firm as those based on solid
rock. The footing areas in contact with the soil must be of sufficient size to spread the
load safely over the soil and to avoid excessive or uneven settlement. Any such
settlement would cause walls to crack or doors to bind.
   Pier foundations are heavy columns of concrete that go down through the loose
topsoil to a bed of firm rock. This bed may also be sand, gravel, or firm clay. If the
bed consists of firm clay, the pier is usually enlarged at the base, to increase the
bearing area.
   Pile foundations are long, slender columns of steel, concrete, or wood. Machines,
called pile drivers hammer them down as deep as 60 metres to a layer of solid soil or
rock. Workers can tell when the columns reach their proper depth by the number of
blows the pile driver needs to drive the columns a few centimetres deeper. These
columns transmit the building load to the supporting soil. Most skyscrapers are
supported by rock foundations.

     Text 2. Types of construction

                                                                                       27