ВУЗ:
Составители:
Рубрика:
– 129 –
DOCUMENT
T Responsibility: Piping
Issue Date: 1 December, 1996
Next Planned Update: 1 April, 1999
1. Scope
This specification defines the minimum mandatory marking re-
quirements for API 5L steel pipe having a nominal diameter of less
than six inches.
2. Conflicts And Deviations
2.1 Any conflicts between this specification and other applicable
Saudi Aramco Materials System Specifications (SAMSSs), Engineer-
ing Standards (SAESs), Standard Drawings (SASDs), or industry
standards, codes, and forms shall be resolved in writing by the Com-
pany or Buyer Representative through the Manager, Consulting Ser-
vices Department of Saudi Aramco, Dhahran.
2.2 Direct all requests to deviate from this specification in writing
to the Company or Buyer Representative, who shall follow internal
company procedure SAEP-302 and forward such requests to the Man-
ager, Consulting Services Department of Saudi Aramco, Dhahran.
3. References
The selection of material and equipment, and the design, con-
struction, maintenance, and repair of equipment and facilities cov-
ered by this specification shall comply with the latest edition of the
references listed below, unless otherwise noted.
3.1 Saudi Aramco References
Saudi Aramco Engineering Procedure
SAEP-302 Instructions/or Obtaining a Waiver of a
Mandatory Saudi Aramco Engineering
Requirement
3.2 Industry Codes and Standards
American Petroleum Institute
API 5L Specification for Line Pipe
4. Product Markings
4.1 The pipe shall have all of the API marking specified in API
5L except the symbol ERW shall be substituted for the symbol E.
4.2 The pipe shall be marked Saudi Aramco, followed by the destina-
tion, Purchase Order number, and the Saudi Aramco Materials System
(SAMS) Catalog designated stock number. If there is no assigned SAMS
stock number, the pipe shall be marked with the item number of the order.
Page 2 of 3
DOCUMENTT Responsibility: Pi ping Issue Date: 1 December, 1996 Next Planned Update: 1 April, 1999 1. Scope This specification defines the minimum mandatory marking re- quirements for API 5L steel pi pe having anominal diameter of less than six inches. 2. Conflicts And Deviations 2.1 Any conflicts between this specification and other applicable Saudi Aramco Materials System Specifications (SAMSSs), Engineer- ing Standards (SAESs), Standard Drawings (SASDs), or industry standards, codes, and forms shall be resolved in writing by the Com- pany or Buyer Representative through the Manager, Consulting Ser- vices Department of Saudi Aramco, Dhahran. 2.2 Direct all requests to deviate from this specification in writing to the Company or Buyer Representative, who shall follow internal company procedure SAEP-302 and forward such requests to the Man- ager, Consulting Services Department of Saudi Aramco, Dhahran. 3. References The selection of material and equi pment, and the design, con- struction, maintenance, and repair of equi pment and facilities cov- ered by this specification shall comply with the latest edition of the references listed below, unless otherwise noted. 3.1 Saudi Aramco References Saudi Aramco Engineering Procedure SAEP-302 Instructions/or Obtaining a Waiver of a Mandatory Saudi Aramco Engineering Requirement 3.2 Industry Codes and Standards American Petroleum Institute API 5L Specification for Line Pi pe 4. Product Markings 4.1 The pi pe shall have all of the API marking specified in API 5L except the symbol ERW shall be substituted for the symbol E. 4.2 The pipe shall be marked Saudi Aramco, followed by the destina- tion, Purchase Order number, and the Saudi Aramco Materials System (SAMS) Catalog designated stock number. If there is no assigned SAMS stocknumber, the pipe shall be marked with the item number of the order. Page 2 of 3 – 129 –
Страницы
- « первая
- ‹ предыдущая
- …
- 127
- 128
- 129
- 130
- 131
- …
- следующая ›
- последняя »