Технический перевод в повседневной жизни. Макеева М.Н. - 61 стр.

UptoLike

ВУЗ: 

ТГТУ | Тамбов

Составители: 

Рубрика: 

вий на область единицы в секунду увеличивается и так уменьшения давления. Наоборот давление уве-
личится как число (номер) увеличений воздействий, если объем (издание) судна уменьшается.
VI. Translate the operator’s manual.
STEAM IRON
Far safety purpose you should read these instructions carefully before using the iron.
DO’S
1. Check the mains voltage gated on the back of iron.
2. Unwind and straighten the power cord before use.
3. Switch on the iron by turning the Temperature Dial n clockwise direction, pilot light glows.
4. Turn the Temperature Dial to the mid point of 1 dot, 2 dots,
3 dots or Max setting.
5. Switch off the iron by turning the Temperature Dial in anti-clockwise direction when it is not in use,
even for a short period of time, turn the temperature Dial to “Min’.
6. Disconnect the iron from mains supply outlet when filling water.
7. Remove the water remained in the water tank.
8. Use the self-cleaning function at least once a month.
DO NOT’S
1. Do not allow children touch the iron or the power cord when ironing.
2. Do not leave the iron unattended when it 'is connected to a mains supply outlet.
3. Do not use an extensive power cord set unless competent authority has approved it.
4. Do not immerse the iron in water or other chemical liquids into the water tank, they can damage the
iron seriously.
5. Do not use the iron when it is damaged or it works improperly.
6. Do not roll the power cord around the iron for storage until it has cooled down completely.
Dry ironing
1. Connect the iron to a suitable mains supply outlet.
2. Turn the Temperature Dial in clockwise direction according to the recommendation of garment label.
3. Pilot light glows indicating the iron is switched on.
4. When the required temperature is reached pilot light goes off.
5. The iron is ready for use.
6. Turn Temperature Dial in anti-clockwise direction to 'Min’, the iron is switched off.
7. Disconnect the iron from mains supply outlet.
8. When the iron gets cool completely, store it in a safe place.
Steam ironing
1. Fill the iron.
2. Connect the iron to a suitable mains supply outlet.
3. Turn the Temperature Dial in clockwise direction to (3 dots) setting (Don not use dot or 2 dots setting
for steam ironing).
4. Pilot light glows indicating the iron is switched on.
5. Pilot light goes off when the required temperature is reached.
6. The iron is ready for use.
7. Turn the Steam Control knob in clockwise direction for more steam, in anti-clockwise for less steam.

Страницы